Load data for .30 PICRA + .308 | 165gr | Nosler Accubond

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 165gr \| Nosler Accubond
Manufacturer SKU:	55602
Bullet Weight:	165gr \| 10.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.308" \| 33.2mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.427" \| 10.8mm
Shank Seated Depth:	0.325" \| 8.2mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B4092_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:11 - 1:9

Load data for 64 loads in caliber .30 PICRA with .308 | 165gr | Nosler Accubond bullet and 32 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	76%	36492	90%	**78	100%
ADI APS 450	<<locked>>	64%	35665	88%	**1	100%
Accurate 4100	<<locked>>	77%	35636	88%	**53	91%
[Accurate No. 11 FS]*	<<locked>>	86%	36216	89%	**73	84%
Accurate No. 9	<<locked>>	65%	35215	87%	**30	96%
Accurate Solo 1250	<<locked>>	64%	36245	89%	**40	100%
Accurate TCM	<<locked>>	65%	35114	86%	**27	97%
Alliant 2400	<<locked>>	74%	36260	89%	**66	94%
Alliant BLUE DOT	<<locked>>	76%	36027	89%	**30	99%
[Hodgdon H110]*	<<locked>>	82%	36434	90%	**93	88%
Hodgdon LilGun	<<locked>>	83%	35331	87%	**16	94%
Hodgdon TrailBoss	<<locked>>	96%	24236	60%	**7	100%
Lovex D037.2	<<locked>>	64%	35215	87%	**30	96%
Maxam CSB 1	<<locked>>	65%	34563	85%	**20	100%
Ramshot Enforcer	<<locked>>	72%	34330	85%	**47	94%
ReloadSwiss RS 14	<<locked>>	92%	21828	54%	**0	100%
ReloadSwiss RS 20	<<locked>>	64%	36260	89%	**86	100%
ReloadSwiss RS 24	<<locked>>	63%	35476	87%	**14	100%
[ReloadSwiss RS 30]*	<<locked>>	96%	32677	80%	**60	89%
Rottweil P 806	<<locked>>	65%	36332	89%	**98	100%
SNPE Vectan A0	<<locked>>	65%	34577	85%	**56	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	30966	76%	**98	95%
SNPE Vectan BA7 1/2	<<locked>>	69%	35549	88%	**22	100%
Shooters World Heavy Pistol	<<locked>>	64%	35215	87%	**30	96%
[Somchem S265]*	<<locked>>	89%	36042	89%	**34	86%
Vihtavuori 3N37	<<locked>>	63%	35752	88%	**32	100%
Vihtavuori 3N38	<<locked>>	71%	34592	85%	**91	100%
Vihtavuori N105	<<locked>>	74%	33881	83%	**98	100%
Vihtavuori N110	<<locked>>	92%	36085	89%	**83	95%
Vihtavuori N32C Tin Star	<<locked>>	81%	36158	89%	**1	100%
Vihtavuori N350	<<locked>>	64%	34156	84%	**12	100%
[Winchester 296]*	<<locked>>	82%	36506	90%	**16	85%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	62%	24671	61%	**17	100%
ADI APS 450	<<locked>>	60%	32619	80%	**2	100%
[Accurate 4100]*	<<locked>>	61%	21205	52%	**17	81%
[Accurate No. 11 FS]*	<<locked>>	81%	29849	73%	**81	80%
Accurate No. 9	<<locked>>	61%	30835	76%	**71	94%
Accurate Solo 1250	<<locked>>	61%	33127	82%	**10	100%
Accurate TCM	<<locked>>	61%	30719	76%	**68	95%
[Alliant 2400]*	<<locked>>	61%	24323	60%	**73	87%
Alliant BLUE DOT	<<locked>>	61%	23670	58%	**43	94%
[Hodgdon H110]*	<<locked>>	71%	25063	62%	**15	81%
[Hodgdon LilGun]*	<<locked>>	63%	18072	45%	**10	81%
Hodgdon TrailBoss	<<locked>>	66%	14388	35%	**2	100%
Lovex D037.2	<<locked>>	61%	30835	76%	**71	94%
Maxam CSB 1	<<locked>>	62%	31633	78%	**8	100%
[Ramshot Enforcer]*	<<locked>>	61%	23090	57%	**63	88%
ReloadSwiss RS 14	<<locked>>	62%	12865	32%	**9	100%
ReloadSwiss RS 20	<<locked>>	60%	33214	82%	**56	100%
ReloadSwiss RS 24	<<locked>>	61%	33112	82%	**84	100%
[ReloadSwiss RS 30]*	<<locked>>	82%	22582	56%	**76	80%
Rottweil P 806	<<locked>>	61%	31807	78%	**42	100%
SNPE Vectan A0	<<locked>>	62%	31850	78%	**24	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	68%	15214	37%	**2	82%
SNPE Vectan BA7 1/2	<<locked>>	61%	28239	70%	**37	100%
Shooters World Heavy Pistol	<<locked>>	61%	30835	76%	**71	94%
[Somchem S265]*	<<locked>>	78%	26687	66%	**96	81%
Vihtavuori 3N37	<<locked>>	60%	33156	82%	**09	100%
Vihtavuori 3N38	<<locked>>	61%	25889	64%	**63	98%
Vihtavuori N105	<<locked>>	61%	22466	55%	**40	99%
[Vihtavuori N110]*	<<locked>>	66%	16607	41%	**2	80%
Vihtavuori N32C Tin Star	<<locked>>	61%	23496	58%	**0	100%
Vihtavuori N350	<<locked>>	61%	31343	77%	**79	100%
[Winchester 296]*	<<locked>>	76%	30298	75%	**20	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.